Fire protection / Bomba maintenance system
Stay ready for your Bomba fire certificate renewal, every month of the year
The fire protection edition of our CMMS for Malaysian buildings and factories, made for facility managers, safety officers and the Bomba-registered contractors who service their fire systems.
- Monthly checklists for extinguishers, fire alarm panels, hose reels, pumps, sprinklers, risers, emergency lights and fire doors
- Your Bomba-registered contractor fills the checklist on a phone, on site
- Fire Certificate, eFEIS and contractor registration reminders before they expire
- Records and PDF reports ready when the Bomba officer or the insurer asks
Sound familiar?
The problems we hear most from building owners and facility teams before a Bomba inspection. Pick yours to see how the system handles it.
The Bomba officer asks for records
Monthly service sheets in a lever-arch file, the fire alarm log book somewhere in the guardhouse, eFEIS certificates in an email from last year.
See the inspection-ready recordsThe Fire Certificate expiry sneaks up
Renewal starts when someone notices the date, not three months before. eFEIS servicing and test certificates are tracked in a calendar, if at all.
See expiry reminders“Contractor came already, boss”
The monthly service invoice arrives, but there is no checklist, no photos and no proof of which extinguishers, hose reels or pumps were actually checked.
See the monthly checklistsDefects found, then forgotten
A gauge in the red zone, a leaking hose reel, a disabled alarm zone. Reported once on WhatsApp, still not fixed at the next inspection.
See defect follow-upFire doors propped open, exits blocked
Doors wedged open for ventilation, emergency lights with dead batteries, exit routes stacked with pallets. Nobody notices until the inspection.
See fire door and exit checksWhose registration is it, and is it valid?
The fire contractor's Bomba registration expired two months ago. Nobody on your side knew to check.
See how contractors work in the systemRecords ready for the Bomba inspection and fire certificate renewal
The Fire Certificate renewal comes with an inspection, and the first thing the officer asks for is records: monthly servicing, test results, the fire alarm log book. Today they are in a lever-arch file, three email threads and the contractor's own folder. Pulling them together takes a week.
With the fire protection pack, every monthly inspection is a record in the system: checklist, readings, photos, who carried it out, who verified and who approved it, with timestamps. When the officer or your insurer asks, open the site and print the report, this month or two years back.
- One report per site and equipment type, covering every unit inspected
- Carried out by / Verified by / Approved by sign-off boxes on every report
- Your company header and document reference, set once by the admin
- Tamper-proof audit trail of every change and approval
Want to see the report with your own sites and fire equipment? We'll walk you through it in 20 minutes.
Book a demoMonthly fire extinguisher inspection and fire alarm maintenance checklists
The contractor comes every month, but what they checked lives on a carbon-copy service slip, if anyone kept it. Which extinguishers? Was the pump run tested? Was the fire door on level 3 still wedged open?
Each piece of equipment is an asset with its own monthly checklist. The system puts the month's inspections on the supervisor's list automatically, assigned to your contractor, so nothing depends on someone remembering.
- The same steps on every unit, by every technician
- Pass / fail items plus readings with expected ranges: battery voltage, pump pressures, running amps, sprinkler pressures
- Readings out of range stand out for the supervisor before approval
- Sites with dozens of extinguishers are checked in one sheet, one row per unit
Fire extinguishers (APA)
Gauge in the green zone, pin and seal intact, correct type for the area, eFEIS label valid. Many units per site, one row each.
Fire alarm panel
No fault or disabled zone, lamp and buzzer test, standby battery voltage, bell and call-point tests, signal to Bomba received, log book updated.
Hose reels
Valve, hose, nozzle and drum checked, water flow test, cabinet and signage in order, access not blocked.
Fire pump sets
Controller on AUTO, duty and standby run tests, jockey pump cycling, cut-in / cut-out pressure and running amps per phase. Diesel fuel and battery checks where fitted.
Sprinkler control valve sets
Main stop valve locked open, installation and supply pressures, alarm gong, flow and tamper switch signals to the panel, spare heads in the cabinet.
Wet and dry risers
Landing valves, caps and chains, breeching inlet, cabinet and signage, access, and pressure on wet risers.
Emergency lights and exit signs
Simulated mains failure, lamps and charging indicators working, exit signs legible and pointing the right way.
Fire doors
Self-closer shuts and latches, seals and intumescent strips intact, not wedged open, panic bar working, signage in place.
Bomba fire certificate and eFEIS renewal reminders
The Fire Certificate is renewed every year through Bomba's SPKA portal, and the renewal needs time: an internal check, fixes, then the inspection. Find out a month before expiry and it's already a scramble.
A compliance register per site keeps every fire safety document and date that isn't a piece of equipment. Reminders go out at 90, 60, 30 and 7 days before expiry, and again on the day, so renewal starts on time.
- Fire Certificate (FC): start the renewal around three months before expiry
- Extinguisher annual servicing and eFEIS certificates
- Fire alarm and sprinkler annual test certificates
- Fire drills, each with its due date and drill report attached
- Fire Safety Management Plan annual review
- Your contractor's Bomba registration: number, expiry and certificate
→ See permit & insurance vault
Your Bomba-registered contractor works inside your system
Fire systems must be serviced by a Bomba-registered contractor, but the records should belong to you, not sit in the contractor's office. Change contractor and the history should stay.
A login, not a portal
The contractor's technician gets their own login in your supervisor's team. The monthly PMs are assigned to them like any other job.
Their name on the report
The contractor appears as “Carried out by” on every printed report, with your supervisor and administrator as verifier and approver.
Two-step approval
Contractor submits, supervisor approves, administrator approves. Every approval is timestamped in the audit trail.
Records stay with you
Checklists, photos and reports stay in your system when the contract ends. The next contractor picks up the same history.
Fire protection defects followed through to closed
An extinguisher gauge in the red zone. A leaking hose reel. A fire alarm zone disabled "temporarily" since last month. Found during the inspection, mentioned in a chat, and still open when the officer arrives.
Raise a corrective maintenance (CM) job on the faulty unit in seconds from the phone, with photos. The PIC and the contractor are alerted right away, and everyone can see the status until it is fixed, with the cause and action taken recorded before the job closes.
- Defects raised on the exact extinguisher, hose reel or panel, not "somewhere on level 2"
- Alerts go to the right people, in the app and by email
- Overdue defects escalate to supervisors and admins
- The defect history stays on the asset for the next inspection
Built for building owners, safety officers and fire contractors
For facility and building managers
See every site's fire equipment status, open defects and upcoming expiries in one place, and face the Bomba inspection with the records already in order.
For safety officers
Drills, the Fire Safety Management Plan review and certificate dates tracked with reminders, alongside the monthly maintenance records.
For fire protection contractors
Open the job on your phone, tick the checklist at each unit, snap photos and submit. No service slips to type up after.
What's in the fire protection pack
- ✅ Ready-made monthly checklists for 8 fire protection equipment types
- ✅ Fire equipment register by site, block and floor
- ✅ Automatic monthly scheduling, assigned to your contractor
- ✅ Pass / fail items and readings with expected ranges
- ✅ Contractor login with two-step approval
- ✅ Printable PDF reports with sign-off boxes and your company header
- ✅ Defects tracked as corrective maintenance with alerts
- ✅ Fire Certificate, eFEIS and contractor registration reminders
- ✅ Tamper-proof audit trail of every change
- ✅ Your own private system and database
Frequently asked questions
What is the fire protection maintenance system?
It is the fire protection (Bomba) edition of our CMMS: a web app for scheduling and recording the monthly inspection and servicing of fire protection equipment across your buildings and sites, with PDF reports, defect follow-up and expiry reminders for the Fire Certificate, eFEIS and your contractor's registration.
How secure is our data, and where is it stored?
Your system runs in ISO/IEC 27001-certified data centres in Singapore — the international standard for information security management. All traffic is encrypted over HTTPS, and your data is backed up every day, with four weeks of backups kept. Each client gets its own installation and database, so your inspection records, contractor certificates and Fire Certificate copies are never shared with another company, and they are covered by the same daily backups.
Which fire protection equipment does it cover?
It comes with ready-made monthly checklists for fire extinguishers (APA), fire alarm panels, hose reels, fire pump sets, sprinkler control valve sets, wet and dry risers, emergency lights and exit signs, and fire doors. Checklists can be adjusted to match your contractor's scope.
Our servicing is done by a Bomba-registered contractor. How do they use it?
The contractor's technician gets their own login in your system and is assigned the monthly PMs. They fill the checklist on their phone on site, and their name appears as "Carried out by" on the report. Your supervisor and administrator then approve it. There is no separate vendor portal to set up.
What is the eFEIS label on a fire extinguisher?
eFEIS is Bomba's online system for portable fire extinguishers. When an extinguisher is serviced, it carries an eFEIS label, and an expired label is one of the first things an inspection picks up. The monthly checklist includes a check that each extinguisher's label is still valid, and the annual eFEIS servicing is tracked with reminders in the compliance register.
Does it apply for or renew our Fire Certificate?
No. The Fire Certificate is still applied for and renewed through Bomba's own SPKA portal. The system tracks the expiry date, reminds you well ahead of it, and keeps the maintenance records and certificates the renewal inspection asks for in one place.
Does it cover lifts?
Not in this pack. Lifts fall under DOSH rather than Bomba, so they are handled separately, including the fireman's lift and fire-mode recall test.
How are inspection reports produced?
Once the supervisor and administrator approve a monthly PM, the report is generated from the checklist in a fixed layout with your company header and the Carried out by / Verified by / Approved by sign-off boxes, ready to print or download as PDF.
Do technicians need to install an app?
No. All they need is a phone. It is a web app that runs in the phone's browser and can be added to the home screen. It needs mobile data or Wi-Fi to save work.
Your contractor already does the work. Make sure it shows on inspection day.
Every monthly inspection recorded, every defect followed through, every expiry date flagged in time, without the lever-arch file. Let us show you on your own sites.